Pointy Rear Master Cylinder connector thingy - Wanted
 

Slim chance but does anyone have one of these bits lying around from a rearset swap?

http://s8.postimg.org/zd0l5o6g5/image.jpg

Thanks

Re: Pointy Rear Master Cylinder connector thingy - Wanted
 

I've got one off a curvy, I'd expect them to be the same.

Re: Pointy Rear Master Cylinder connector thingy - Wanted
 

I've just measured it and the thread is 8mm, the overall length is 33mm and the diameter of the part where the back of the lever slots in is 8mm

Re: Pointy Rear Master Cylinder connector thingy - Wanted
 

Nice one, I'll try it! Just pm me with your asking price and go from there. Cheers.

Re: Pointy Rear Master Cylinder connector thingy - Wanted
 

I was lacking one of these before and found out it was called a 'Rear brake pedal yoke' according to a parts site, had no other name than that. Really struggled to get hold of one I ended up finding a whole rear master cylinder on ebay with it attached for about £10. If no joy just check out ebay for cheapo master cylinders and nab the yoke from those.

Re: Pointy Rear Master Cylinder connector thingy - Wanted
 

Thanks bud, I had been looking on ebay but most Master Cylinders were £20 which seemed a bit much for the little bit I need.

Looks like Alex has sorted me out ;)

Cheers both.