![]() |
Gen 2 clutch cover fit gen 1??
Hi guys, pretty simple request got the leaking clutch cover on the gen 1. For now I've bodged it but I don't want to fork out for that wood thingy one that's like £150. Can I replace the whole clutch cover with the gen 2 onwards models that have the sealed unit?? It looks like a straight swap from pics on eBay? P.s anyone selling one? Cheapest I've seen is £30 posted.
Thanks in advance for any help. |
Re: Gen 2 clutch cover fit gen 1??
Looking at this I would say no; http://www.ronniesmailorder.com/oemp...rankcase-cover
http://www.ronniesmailorder.com/oemp...rankcase-cover |
Re: Gen 2 clutch cover fit gen 1??
I would say yes.
The reasoning as follows: The engines are basically identical between the models. There are some differences such as the design of the clutch cover but parts are readily interchangeable, for example the cams, the shift selector etc. Additionally there was a chap who was selling clear covers (if anyone has one to sell then please PM me) to fit both models. To fit them to the later model you needed to use the gen1 cover to fit the clear part to. Therefore if there is forward compatibility it stands to reason there is backwards compatibility. However I've never done it myself. |
Re: Gen 2 clutch cover fit gen 1??
Not sure looks the same to me as in same position of bolts and number. Only difference is gen 1 has a removable clutch window and newer versions don't. I'm sure I read someone has done this.
|
Re: Gen 2 clutch cover fit gen 1??
Quote:
Nillie's clutch cover were machined CNC jobbies and as far as I remember fitted both curvy & pointy. I know because I have one on my curvy |
Re: Gen 2 clutch cover fit gen 1??
cool. what are these clutch covers? are they an aftermarket product for the gen 1?
|
Re: Gen 2 clutch cover fit gen 1??
its ok i found the thread lol
|
Re: Gen 2 clutch cover fit gen 1??
think im going to give it a whirl and will let you know. I have put some fabric washers, new bolts and sealant on the clutch window part and it has stopped but that was only just today so it could go again in a few days. only issue is there are no black ones but the frame is silver so shouldnt look too bad.
|
Re: Gen 2 clutch cover fit gen 1??
One off special made by a German Orger a few years ago. Not cheap but well made.
Woodcraft make clutch covers for Sv's, not cheap either, but don't warp like OEM ones. |
Re: Gen 2 clutch cover fit gen 1??
ive seen the woodcraft ones but at £150 i think ill pass lol. they do look good though.
|
All times are GMT. The time now is 07:32 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.