Stock indicators flashing fast
 

Sorry I know its another indicator post, I've read a lot about aftermarket LED indicators flashing fast but nothing specific to my problem.

So I recently bought a SV650 and the indicators are flashing way too fast (about 200 blinks per minute). They're stock indicators.

It came with a aftermarket LED halo headlight installed so I suspect this is what's causing the problem.

My question is what can I do to fix the fast flashing? I guess an LED indicator relay won't work because they're not LED indicators.

I'm thinking I'm going to have to install resistors to the headlight? (Haven't actually checked if there are any installed yet). If so do I have to do one to every bulb? (Halo ring/dip/full) or is there one I can add that will affect all bulbs.

Thanks in advance.

Sent from my SM-G981B using Tapatalk

Re: Stock indicators flashing fast
 

Are all your indicator bulbs working? If so check the indicator relay as that's what controls the flashing rate.

Re: Stock indicators flashing fast
 

Is this with the lights off? If it is I cannot see how the headlight could cause it. Have you removed the headlight? That would eliminate it.

Got to say M/bikes with an ECU I have no knowledge of. What model/year is the bike.

Re: Stock indicators flashing fast
 

Also the hazards flash at the same rate as when I use the indicators.

Re: Stock indicators flashing fast
 

Yeah all indicator bulbs are working, not sure if it makes a difference but when I turn on hazards it's also flashing fast. Is there a way of checking the relay is good?

Sent from my SM-G981B using Tapatalk

Re: Stock indicators flashing fast
 

I can't turn the head light off as there's no switch, the headlight turns on with the ignition. It's a SV650 K3, 2004 model. Yeah maybe I'll try unplug the headlight see if that works.

Sent from my SM-G981B using Tapatalk

Re: Stock indicators flashing fast
 

You might want to check that you have the correct wattage bulbs fitted if the bike is new to you. 12V 21W. Is the flasher relay standard too?

Re: Stock indicators flashing fast
 

Of course you can use an LED relay with bulbs, the difference between a 'thermal' relay ( filament bulb type ) and an electronic ( LED ) one is that with the thermal one the flash rate is solely dependent on correct load of 2 x 21watt bulbs = about 3.5 amps ) - with the LED ( electronic time base ) the flash rate is set by internal electronics and is independent of load. Links to Ebay and the like 7 pin Suzuki LED relays on forum in other indicator threads.

Most LED relays will support about 100watts.

The LED headlight is a red herring, I cannot see any way the LED will affect flasher rate, some LED's do emit RH interference ( which can affect radios and stuff ) but could not affect flasher rate.

https://www.ebay.co.uk/itm/SUZUKI-7-...-/131223714897

Re: Stock indicators flashing fast
 

Okay thanks for the detailed answer! I've ordered an LED relay and hopefully that will do the trick then, I'll update when it arrives.

Sent from my SM-G981B using Tapatalk

Re: Stock indicators flashing fast
 

You can even use combinations of LED and conventional bulbs with an LED relay, so mix and match front LED with rear filament bulbs etc.....