Where do you fit it?
 

Where do you fit the scottoiler on the K1-2 so it has a good access for refilling?

Which pipe do splice from the carbs for the scottoiler connection?

Not sure about where to get the vacumn but from what people have said the left panel under the seat is a good place for the reservoir.

I have my lubeman just under the left hand black pannel.. though I don't know if a Scotoiler would fit.

I had a look at the space during lunch, it does look a bit cramped, and seems like the cover will not close properly.

I cant put it under my front or rear seat as i have loads of stuff in there.

I have thought that it might be best placed under the rear undertray.

Try the main site, there's a how to on the subject.

spudnuts.

Anyone got any idea where you could fit a touring one on a K4 with hugger? Ideally, I'd want to be able to remove the stock rear fender at a later date, without messing it up.

How do you get the panel off to squeeze the bottle? On my SV, they're fastened with a socket-head screw at the bottom and a 'trim' clip at the back.

On the left hand side just past the lock to release the pillion seat mounted on the plastic bodywork by the pillion footrest

Was on there when I bought the bike

Mine used to just be in the boot- it was there when I got it- but it used to get unprimed all the time and was generalyl a hassle... I moved it behind hte wee black plastic thing same as everyone else- there's a tapped hole the right size for the reservoir bracket to fit into (though it's a pain getting it set up nicely) I've never got the side panels on so it's dead easy to see- but even if you do have them it only takes 10 secodns to take them off and check.

it sit's just 'below' the pannel, on the sub frame, its out of view but accessable. I'm going to try to sort some pics this weekend as I need to clean the chain anyway.