Carb syncing
 

Just put the beast back together after a failed attempt at syncing the carbs, all adjustment was taken up by the pins moving around in the link bar to the front carb (if you know the bit i'm talking about)

Luckily i've got a spare set of carbs form ages ago which i knew would come in handy one day

P.S. I was also thinking of doing the mod to ease syncing which involves adding tubes, but IMHO i didn't have a problem getting to the front vac nipple :wink:

I left 6" or so of vacuum tube connected to the front and a shorter bit from a T-piece on the rear. They're sealed with a suitable bolt screwed up the pipe when not needed.

definately worth doing the wee tube extension thang, IMO.