Aftermarket Levers
 

Hey guys,

I am interested in buying some shorty aftermarket levers for my 2003 SV650S. I was looking at CRG and Pazzo, but neither of the companies make them for the SV. Do you have any recommendations? Thanks,

Mitch

EDIT: Pazzo makes some levers for the 03-06 SV1000, would those fit a 650 as well?

Re: Aftermarket Levers
 

The brake lever may, but the clutch is hydraulic on the thou so unlikely to fit.

What you can do, though, is fit a recent GSXR clutch perch. Direct swap... Though you might have issues with the clutch cutout switch (I don't have one so I didn't pay it any heed) I doubt it would be hard to fix.

Aren't the TLS levers the same as the SV's

Yes/No

The brake fittment is the same but the TLS's had a 4 click leaver vs. the SV 6 click. Either will work, just the adjustment is not the same.

The clutch lever is diffrent, but as was said if you use a TL or GSXR clutch bracket then you can use levers from thoes bikes. The switch is diffrent i think though, but not a problem if you bridge the wires.

TLR brake is the same but the clutch is hydro so no it wont work.

when you look them up in M+P, Demon tweeks the codes are the same for the SV and the TLS!!!

If I'm remembering right, TLRs had a hydraulic clutch, TLSs had a cable one.

So there you have it... I guess I will have to wait a bit before I spend more money on SVen. ;) Are there other manufacturers out there that produce levers?

Mitch

CRG, but they don't do SV either.

Seriously, if you want to, it takes a matter of minutes to change the perch over. If you cna change a lever, you can do it.

What exactly is the perch? And where would I get it?

Mitch