SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Tail tidy ... is it easy to fit one (http://forums.sv650.org/showthread.php?t=83438)

Shellywoozle 03-02-07 07:42 PM

Tail tidy ... is it easy to fit one
 
Hi guys

I have a K4 pointy and have taken a liking to the tail tidy. I have seen a few posts on here but can't find them now.

How easy are they to fit and how much ???? Are they Suzuki original?

Any help would be appreciated.

Cheers
Shell :P

kwak zzr 03-02-07 08:32 PM

hi shelly, you can buy a good tail tidy from here - http://www.hamicad.co.uk/
and yes they are quite easy to fit if your half decent with spanners and a screw driver :D
a tail tidy will really tidy up your rear end :roll:

drumroll 04-02-07 12:50 AM

just fitted a tailtidy
got one from here - http://stores.ebay.co.uk/EVOTECH-PERFORMANCE

think the evotech, or as kwak says, the hamicad, are the tailtidys of choice on this forum.

whichever one you get, its not too hard to fit. comes with easy instructions. took me about 2 hours all in - and im useless with spanners! :)

Shellywoozle 04-02-07 05:40 PM

Quote:

Originally Posted by kwak zzr
hi shelly, you can buy a good tail tidy from here - http://www.hamicad.co.uk/
and yes they are quite easy to fit if your half decent with spanners and a screw driver :D
a tail tidy will really tidy up your rear end :roll:

what you saying about my rear end :P

thanks guys !!! cheaper than I thought and girlie friendly too (maybe) ... that's my next thing on the ebay purchase list :lol:

Baph 18-03-07 08:45 AM

Re: Tail tidy ... is it easy to fit one
 
Just to drag this thread up.

Shellywozle, if you're faint hearted, you might want to get someone else to fit a tail tidy.

This is my K6 half way though fitting the evotech. I'm not phased by the look of it, but my dad was, and a couple of folk on the forum seemed to wince a little.

Please note, mine has quite a few extra wires added over stock. So yours wouldn't quite look this bad, but still not something for the faint hearted to do to their pride & joy.

kwak zzr 18-03-07 09:55 AM

Re: Tail tidy ... is it easy to fit one
 
was going to say baph my dint have half that wireing when i fitted my tidy, you'll scare shellywoozle when she sees that.:)

LeeSV 18-03-07 07:24 PM

Re: Tail tidy ... is it easy to fit one
 
Quote:

Originally Posted by Shellywoozle (Post 1111137)
Hi guys

I have a K4 pointy and have taken a liking to the tail tidy. I have seen a few posts on here but can't find them now.

How easy are they to fit and how much ???? Are they Suzuki original?

Any help would be appreciated.

Cheers
Shell :P

R&G ones are nice, they take OE indis or aftermarket ones and you get a LED plate light with it. As for fitting them its handy enough. Paid £30 for it i think.

kcowgergmm 18-03-07 11:06 PM

Re: Tail tidy ... is it easy to fit one
 
here is what i just did you can find the exact plans on the faq on the home page http://forums.sv650.org/showthread.php?t=85668


All times are GMT. The time now is 10:50 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.