SV650.org - SV650 & Gladius 650 Forum - best place for a 14 tooth front sprocket

Page 1 of 4

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - best place for a 14 tooth front sprocket (http://forums.sv650.org/showthread.php?t=85298)

Quiff Wichard

09-03-07 09:21 PM

best place for a 14 tooth front sprocket

for curvy 02..

ideas>?

plus- if I change to a 14 front I dont need to change my chain do I?

just a nice off and on job...

Quiff Wichard

09-03-07 09:30 PM

Re: best place for a 14 tooth front sprocket

oh and is it simple to change-?.. any special tools..

weazelz

09-03-07 09:39 PM

Re: best place for a 14 tooth front sprocket

Quote:

Originally Posted by Quiff Wichard (Post 1134707)

for curvy 02..

ideas>?

plus- if I change to a 14 front I dont need to change my chain do I?

just a nice off and on job...

if your chain & sprox are very worn then you might want to consider replacing them, otherwise the new sprocket won't fit the worn (& stretched) chain very well

if not, then you'll just have the adjust your wheel back a bit to take up the extra link's worth of slack (since you sprocket is now 1 link less long)

Quiff Wichard

09-03-07 09:51 PM

Re: best place for a 14 tooth front sprocket

cool and is it easy to change?

BILLY

10-03-07 09:18 AM

Re: best place for a 14 tooth front sprocket

Very easy But you will need a strongarm/breakerbar! If you have a haynes manual it explains it in detail in there if not I will scan the relivent pages for you and email it to you.

Sid Squid

11-03-07 08:22 AM

Re: best place for a 14 tooth front sprocket

Quote:

Originally Posted by Quiff Wichard (Post 1134712)

best place for a 14 tooth front sprocket ?

On the geabox output shaft - can't think of a better place for it to be.

weazelz

11-03-07 08:34 AM

Re: best place for a 14 tooth front sprocket

Quote:

Originally Posted by Sid Squid (Post 1135345)

On the geabox output shaft - can't think of a better place for it to be.

lol - I resisted that answer

Quiff Wichard

11-03-07 02:42 PM

Re: best place for a 14 tooth front sprocket

Sid .

you are so dry .

hovis

19-03-07 08:30 PM

Re: best place for a 14 tooth front sprocket

did you get one? where from ? how much?

Quiff Wichard

19-03-07 08:37 PM

Re: best place for a 14 tooth front sprocket

No No and errr NO

All times are GMT. The time now is 06:29 AM.

Page 1 of 4

Show 40 post(s) from this thread on one page