SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   speedo is out (http://forums.sv650.org/showthread.php?t=93996)

hovis 24-07-07 09:02 PM

speedo is out
 
the speddo is not working properly, when its showing 60mph im doing 80, also the milometer is out

is it possible to re-calibrte them?

rigor 24-07-07 09:06 PM

Re: speedo is out
 
Sounds like the sprockets have been changed on your bike then (I'd guess, I don't know where a Blade takes the speedo reading from)

I know there are things out there called Speedo Healers, but I'm not sure exactly how they work.

Beenz 24-07-07 09:22 PM

Re: speedo is out
 
I assume that you are talking about the Blade. If the speedo drive is from the front wheel, the sprockets should not make and difference however if you have a different diameter wheel (larger) then your speedo may well run low. I can't remember if your bike had a 16" wheel as standard or a 17", even then if I recall the profile of the tyre was different so maybe that should not make that much of a difference that you speek of. If the speedo drive is from the gearbox/engine then the sprockets could make a difference as rigor has already stated. As for recallibration, I dunno. Good luck on finding a fix for it.

Just out of curiosity how did you find out? Hopefully not from the boys in blue.

hovis 24-07-07 09:31 PM

Re: speedo is out
 
it just felt faster than what it was reading, so i asked zombie jesus how fast he was going.

he was doing 80-90 & i was right behind doing 60-70

also just passed one of thesethings at the side of the road, it said i was doing 31, but the clock said 25

it looks like there is a sensor going to the front sprocket,

hovis 25-07-07 09:36 AM

Re: speedo is out
 
right, my bike sprocket is 1 tooth smaller than standard,will it make this much differance? the speedo goes to the front sprocket.

kwak zzr 25-07-07 10:04 AM

Re: speedo is out
 
leave it how it is and if the old bill stop ya then tell them to have a go! its not your fault you dont know any difference:)

hovis 25-07-07 10:23 AM

Re: speedo is out
 
Quote:

Originally Posted by kwak zzr (Post 1245846)
leave it how it is and if the old bill stop ya then tell them to have a go! its not your fault you dont know any difference:)

i did think about that, but i dont think i would get away with it

Stu 25-07-07 10:30 AM

Re: speedo is out
 
If it goes to your front wheel then forget about sprockets and gearing. It's probably like an SV running off 4 magnets passing a sensor. And sounds like one magnet is not working therefore reading 3/4 of truth.
Start learning your 1.33 times tables,
or break off another magnet & learn your 2 times tables,
or get it fixed,
or buy a Veypor to wire in instead http://www.veypor.co.uk/xcart/produc...cat=261&page=1

hovis 25-07-07 10:39 AM

Re: speedo is out
 
Quote:

Originally Posted by Stu (Post 1245881)
If it goes to your front wheel then forget about sprockets and gearing.
or buy a Veypor to wire in instead http://www.veypor.co.uk/xcart/produc...cat=261&page=1

Quote:

Originally Posted by hovis (Post 1245821)
right, my bike sprocket is 1 tooth smaller than standard,will it make this much differance? the speedo goes to the front sprocket.

:confused:

Smudge 25-07-07 10:52 AM

Re: speedo is out
 
my sv doesnt have any magnets it has sprokets


All times are GMT. The time now is 11:54 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.