SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Ecosse (http://forums.sv650.org/forumdisplay.php?f=127)
-   -   Paintwork on the front forks (http://forums.sv650.org/showthread.php?t=97199)

-Ralph- 19-09-07 09:26 PM

Paintwork on the front forks
 
http://forums.sv650.org/showthread.php?t=97198

SVTONYB 19-09-07 10:59 PM

Re: Paintwork on the front forks
 
personally I would get them powder coated or buff them till they gleem :cool:

scooby2102 20-09-07 12:51 PM

Re: Paintwork on the front forks
 
remember noticing them at the last rideout, they did look a bit RAF


mines is nearly 4 years, 9k miles and they're like new so probably not an old issue thats since been improved, could be a bad batch of legs/paint/laquer

I would say it should be a straight warranty claim, would be surprised if they knocked it back

-Ralph- 20-09-07 02:49 PM

Re: Paintwork on the front forks
 
Pictures Attached

-Ralph- 15-11-07 05:24 PM

Re: Paintwork on the front forks
 
Well done Saltire!

http://forums.sv650.org/showthread.p...67#post1341867

SVTONYB 15-11-07 11:48 PM

Re: Paintwork on the front forks
 
well done ralph :cheers:

Tiger 55 16-11-07 07:42 AM

Re: Paintwork on the front forks
 
Which bit is the engine cover?

DarrenSV650S 16-11-07 04:56 PM

Re: Paintwork on the front forks
 
That is what my yoke is like too, forks are fine though. I was going to remove the yolk over winter and autosol it up, but I'm putting gsxr forks on now instead

-Ralph- 16-11-07 07:03 PM

Re: Paintwork on the front forks
 
Quote:

Originally Posted by Tiger 55 (Post 1342383)
Which bit is the engine cover?

This bit...

Tiger 55 17-11-07 11:14 AM

Re: Paintwork on the front forks
 
Quote:

Originally Posted by Tiger 55 (Post 1342383)
Which bit is the engine cover?

Quote:

Originally Posted by -Ralph- (Post 1343327)
This bit...

Oh, the clutch cover ;)

Step aside Spanner Man, Tiger's got a Haynes manual and knows how to...

...read it with a cup of coffee :roll:


All times are GMT. The time now is 02:21 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.