How much should it cost........
 

I need a new chain and sprockets and am thinking about fitting a scottoiler at the same time.

How much should I be expecting this lot to cost me.

Re: How much should it cost........
 

C&S ?80-?100

scottoiler ?50

fitting 2 hours labour ?70-?90

or FIT it your self FREE

Re: How much should it cost........
 

Was thinking of attempting the self fit route, but am not very experienced with the art of spanners. Is it a job that a noob should be attempting.

Re: How much should it cost........
 

the chain will need a specail tool to join it together & should take a garage 1 hour labour

the scotoiler is fairly easy i would guess it will take you 1-2 hours, no special tools needed........ garage may charge 2 hours


where abouts are you, as sombody on here may offer to do it for tea & biccys?

Re: How much should it cost........
 

The scottoiler, ?60 & fit it yourself.

The chain & sprockets, depends on what you go for. Expect in the region of ?100 for both (for that money, I'd be getting steel sprockets - last longer than alloy). Then about another ?25 to fit them.

Hovis, 1hour to fit C&S?? :lol: That might be the minimum charge, but it should only take them half an hour tops!!

You can do sprockets & chain yourself, but you'll be needing tools (chain riveter, torque wrench - and the front sprocket can be a bugger to get off, so could need an impact gun).