SV650.org - SV650 & Gladius 650 Forum - View Single Post

Biker Biggles · 19-02-07, 11:53 AM

Cheers for that.The fuel feed is by twin pipes which join at a Y piece just before it enters the carbs.There is then a set of horizontal short pipes between each carb,which look like the carbs would need to come off their mounting bracket to replace.I'm tending towards the stuck valve in seat though,as it has been standing for some time.Should be obvious with the float bowl off.

19-02-07, 11:53 AM	#6
Biker Biggles Member Mega Poster Join Date: Jan 2005 Location: Barnet Herts Posts: 5,071	Re: Mikuni Carbs Cheers for that.The fuel feed is by twin pipes which join at a Y piece just before it enters the carbs.There is then a set of horizontal short pipes between each carb,which look like the carbs would need to come off their mounting bracket to replace.I'm tending towards the stuck valve in seat though,as it has been standing for some time.Should be obvious with the float bowl off. __________________ On a clear day we stand there and look further than the ordinary eye can see.