ells

Many thanks guys,
Is there any point of commonality that would fail starter and ignition circuit. Cos short of us blowing a fuse while we had our fingers in there I cant see why she would not restart?

Have had some difficulty with getting the starter motor to go live before. Had to clean the clutch switch. I thought that was it.

Oh well good opportunity to take her to bits and give her dome tlc.

I have downloaded manuals and wiring diagrams so should be able to make a start on the diagnosis.

As a starting point am I right assuming that the black\yellow lead onto the starter motor relay (one with green cover) should be 12v+ to trigger the relay and 0v when not. ie ign on and clutch etc press button black and yellow should be hot.

Also is there somewher good in the loom to check that the bike would run if stsrted ie a point on the coils or somewhere?

Cheers.
Mark.