SV650.org - SV650 & Gladius 650 Forum - View Single Post

Sid Squid · 24-05-07, 04:01 PM

A standard tubeless valve goes in a hole 11.5mm diameter, (cars and bikes of my knowledge anyway, othe stuff may be different). A typical valve is a 'TR412' 20mm length. Other lengths are available depending on application, but generally on a bike wheel, particularly the front 'cos of the discs, the shorter the better.

An example of a '412': "http://www.tyrebaydirect.com/7-Standard_Snap_in_Valves/124-TR412_22mm_length_x_100.html"

24-05-07, 04:01 PM	#6
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: Mine is bigger than yours! A standard tubeless valve goes in a hole 11.5mm diameter, (cars and bikes of my knowledge anyway, othe stuff may be different). A typical valve is a 'TR412' 20mm length. Other lengths are available depending on application, but generally on a bike wheel, particularly the front 'cos of the discs, the shorter the better. An example of a '412': "http://www.tyrebaydirect.com/7-Standard_Snap_in_Valves/124-TR412_22mm_length_x_100.html" __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst" Last edited by admin; 05-12-13 at 09:57 PM.