SV650.org - SV650 & Gladius 650 Forum - View Single Post

rictus01 · 20-12-07, 07:11 AM

1. lift tank
2. undo the four screws holding in the air filter
3. remove air filter
4. look in both corners (nearest the seat end) look for the opening leading directly down from the airbox( apart from the two main ones).
5. wipe out any oil in there?
6. if you really have to ( and I don't know why you would) undo the metal clip around the short length of blocked off pipe and pull it off.

7. re-fit in reverse order.

if you can't follow those simple instructions, then I'd suggest you get someone esle to have a look because it really is that simple.

Cheers Mark.

20-12-07, 07:11 AM	#4
rictus01 Member Mega Poster Join Date: Jul 2003 Location: South London Posts: 9,799	Re: Air Cleaner Drain Plug 1. lift tank 2. undo the four screws holding in the air filter 3. remove air filter 4. look in both corners (nearest the seat end) look for the opening leading directly down from the airbox( apart from the two main ones). 5. wipe out any oil in there? 6. if you really have to ( and I don't know why you would) undo the metal clip around the short length of blocked off pipe and pull it off. 7. re-fit in reverse order. if you can't follow those simple instructions, then I'd suggest you get someone esle to have a look because it really is that simple. Cheers Mark. __________________ Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride! Last edited by rictus01; 20-12-07 at 07:14 AM.