SV650.org - SV650 & Gladius 650 Forum - View Single Post

flymo · 25-02-08, 03:51 PM

nah, nothing to worry about with this. You need to remove the top center nut and washer. Loosen the bolts that tighten it to the top of the forks and give it a few taps from beneath. Provided you havent loosened the fork bolts on the lower yoke it'll be fine.

Once you've removed the top yoke you'll see two locking rings. If you leave these in place then you dont need to worry about bearings in the head at all.

25-02-08, 03:51 PM	#5
flymo Member Mega Poster Join Date: Jan 2008 Location: North West Posts: 3,124	Re: Top Yoke removal Help nah, nothing to worry about with this. You need to remove the top center nut and washer. Loosen the bolts that tighten it to the top of the forks and give it a few taps from beneath. Provided you havent loosened the fork bolts on the lower yoke it'll be fine. Once you've removed the top yoke you'll see two locking rings. If you leave these in place then you dont need to worry about bearings in the head at all.