Quote:
Originally Posted by fizzwheel
I bet you shiney english pound that the wiring loom is rubbing against the frame somwhere. Places to check
1. Around the headstock
2. Where the loom disappears under the tank / airbox
3. Where the riders seat is, the bolts that hold the seat on can rub onto the wiring loom
4. In and around the rear plastics, sometimes the loom rubs on the subframe.
HTH
|
I am having a similar problem except my fuses never last more than about 30 seconds.
But i am puzzled as to how this would cause the fuse to keep blowing. Is it just if the wires are touching something or is it because the wires are being "pinched".