SV650.org - SV650 & Gladius 650 Forum - View Single Post

Biker Biggles · 19-09-08, 08:54 PM

If you follow the choke cable from the bars it goes into a splitter between the frame and front cylinder and a cable goes to each carb.These are held in place by a plate with a screw.Undo the screw and pull out the cable which will bring out the plunger.
All this lot including the cables can sieze up causing the chokes to stick on and poor running.The screws are prone to rusting in place,hence they get left for long periods,especially the front one.

19-09-08, 08:54 PM	#8
Biker Biggles Member Mega Poster Join Date: Jan 2005 Location: Barnet Herts Posts: 5,071	Re: Cant get past 8,000 rpm?? If you follow the choke cable from the bars it goes into a splitter between the frame and front cylinder and a cable goes to each carb.These are held in place by a plate with a screw.Undo the screw and pull out the cable which will bring out the plunger. All this lot including the cables can sieze up causing the chokes to stick on and poor running.The screws are prone to rusting in place,hence they get left for long periods,especially the front one. __________________ On a clear day we stand there and look further than the ordinary eye can see.