Hello,
I did the zx636 c1h on my curvy, the battery box needed cutting as well as the tank hinge.
Only saw 1 zx10 fitted (didn't need the hinge cut) but that was an earlier model.
Get a sharp stanley knife, cut what needs cutting, the battery still goes it the same place (I THINK this will be the same with the 2k8 shock), It will sit on the shock reservoir, so put some padding there (mine was ok after 8 months and 5k miles) you'll have to bin the top battery tray and relocate the fuse box. you also
might have to cut the tank hinge, I used a junior hack saw.
Useful tool: rubber mallet.
Unfortunately I live on the other end of Scotland :/
Useful thread:
http://forums.sv650.org/showthread.p...ighlight=shock
HTH