SV650.org - SV650 & Gladius 650 Forum - View Single Post - Anyone near Manc with a 19mm hexagon bit for swingarm I can borrow?

Dave20046 · 12-04-09, 03:14 PM

probably lithium don't quote me on that though. I use castrol high temp l&m bearing grease (IIRC)

The socket size is 19 on one side and 17 on the other (I think) can never remember. Have you a large adjustable spanner you could have a gentle go with? or use mole grips or something to hold the 19mm side and try and undo it at the 17mm side (bit bodgey though).

Good luck

12-04-09, 03:14 PM	#2
Dave20046 Member Mega Poster Join Date: Jul 2008 Location: Sheffield Posts: 10,274	Re: Anyone near Manc with a 19mm hexagon bit for swingarm I can borrow? probably lithium don't quote me on that though. I use castrol high temp l&m bearing grease (IIRC) The socket size is 19 on one side and 17 on the other (I think) can never remember. Have you a large adjustable spanner you could have a gentle go with? or use mole grips or something to hold the 19mm side and try and undo it at the 17mm side (bit bodgey though). Good luck __________________ Last edited by Dave20046; 12-04-09 at 03:18 PM.