Originally Posted by Holdup

Stock 3 on front, Rear i believe is 4 on S model and 3 on naked model.

i used this

http://www.gostar-racing.com/informa...ion_set-up.htm

but only using the preload guides obviously, only done front so far, cables ties on both forks (i did any way can only do 1 if you want), lose but not too loose just so no damage caused to stanchons or seals, add/remove a click each time, go for ride, messure the distance from bottom of cable tie to bottom yoke, each time you add remove a click, reset the cable tie, then once there is 10mm between cable tie and yoke, perect front preload set up, then set up rear sag (which i havent done yet, you may also find that then front needs messing with again) all explained in that guide.

HTH