View Single Post
Old 10-10-09, 08:51 AM   #18
sz1
Guest
 
Posts: n/a
Default Re: Flipping Datatool...

Quote:
Originally Posted by trainofthought View Post
Thanks for the help so far guys.

Right then. I've ripped the sod out....

Attachment 5403

I've sorted everything except these four black wires, but i can't see anything to connect them to. Where do they go?!

Attachment 5404

Attachment 5405

Told you i wasn't very good at electrics.....

right old chum bet you've lost your fuel pump ?

here's your lesson , strip loom back a little bit more and you will find where they have tagged them 4 wires in probably on something like red/white, brown black, orange green and can't remember other colour.

I'll attach a wiring diagram to help you but if you search my posts you will find my thread about it- lesson continues

before your alarm was installed there was a alarm plug on the end of them wire's one plug had 4 wires in with 2 bridged and the out he plug just one black wire , which goes back to a small white block with 5 white/black wires and your one black wire just tape this one off its not needed till you have a alarm fitted!!!!

as for the alarm plug don't worry that its not there once you have peeled back loom abit you will see where they have tagged on to your wiring you need orange with white tracer take White from here then get you mode select switch socket white with a black rubber cap ! attach wire from orange /white to orange green and she will be alive again you can just tape up other tagged on wires or remove the it's up to you! i also had a extra live coming out me fuse box just tape it up if you have one hope this helps look at my other thread ill attach wiring diagram that helped me , where abouts are you?
Attached Images
File Type: jpg k4 wiring 2.jpg (126.8 KB, 16 views)
  Reply With Quote