Quote:
Originally Posted by walkaboutandy
Well I found the plug, its a two pin white socket that was tucked into a black rubber shroud near the fuel pump. It should have a orange/yellow wire and black/white wire going to it. It should also read 12v with the ignition on.
I have bought the loom off ebay which has a thermoswitch included with it for a tenner.
I know what your saying YC but as I was getting carbs with heaters on it I thought it would be worth wiring them up. I ride throughout the year and I have had to use isopropanol as the bike is nearly unrideable in the cold the misfire is so bad. One particular incident in the freezing fog where the bike just didn't want to run at any speed with alot of backfiring, it would then stall everytime I stopped. That was with using the isopropanol too. So I have tended to avoid using the bike when its under 3 degs cos its so horrible to ride. Hopefully using heaters and isopropanol may mean a more pleasant winters riding.
|
Top man. Thanks for that info. I left my manual at my In-laws and thats saved me a journey to collect it. Did you get a whole wiring loom or just the carb bit?