SV650.org - SV650 & Gladius 650 Forum - View Single Post

09-12-09, 04:46 PM

If you have an injected bike then a CBR600 1995-1998 model rear wheel fits in. You need to take a few mm from the spacer and then everything just fits in fine. You need the CBR sprocket carrier, sprocket and disc too. Whole lot can be had from ebay for £40-£80.

You can fit a GSXR rear wheel say from a 600K6 but you need to have the sprocket carrier hub machined down to get the sprocket carrier to line up correctly with the chain.

Steve runs a 180 section rear on his race bike and it works very well and improves tyre wear on track as the load on the tyre on the edge is spread over a larger footprint.

09-12-09, 04:46 PM	#4
SV650Racer Guest Posts: n/a	Re: 180 on an SV If you have an injected bike then a CBR600 1995-1998 model rear wheel fits in. You need to take a few mm from the spacer and then everything just fits in fine. You need the CBR sprocket carrier, sprocket and disc too. Whole lot can be had from ebay for £40-£80. You can fit a GSXR rear wheel say from a 600K6 but you need to have the sprocket carrier hub machined down to get the sprocket carrier to line up correctly with the chain. Steve runs a 180 section rear on his race bike and it works very well and improves tyre wear on track as the load on the tyre on the edge is spread over a larger footprint.