[Paul the 6th]

Originally Posted by yorkie_chris

SRAD spacing is 90mm, b12 ones will fit.

TBH there's nowt wrong with the 4 or 6 pot tokicos if you keep up to the maintenance.

Apparently the 6 pots are great, IF they're maintained properly and work right. Quite a few people have said they're a biatch to bleed though

Originally Posted by Lozzo

Junk the 6 pots cos they are crap. Put some Nissin 4 pots off a Bandit 1200 on if the spacing is 90mm between the bolt centres. I recommend the Bandit Nissins because the calipers are hard anodised all the way through the working bits, including the piston bores and seal grooves, unlike all Tokicos which are bare alloy in there and suffer badly from corrosion.

My housemate has Bandit 1200 calipers on his ZX7R after junking the standard 6 pots, and with a stock ZX10R radial m/cyl they are fantastic brakes.

And yeah, alot of people have also said the same about ditching 6 pots for 4 pots as they're usually just as powerful (if not a little bit more) but require far less maintenance...

Gonna pull them apart when I get home from work tonight