SV650.org - SV650 & Gladius 650 Forum - View Single Post - SK9 suddenly got noiser / more vibrations

Ratty · 06-07-10, 01:22 AM

The header pipe is the pipe that comes out of the cylinder head. The front and rear header pipes ( on the thou ) go into a collecter box under the engine before heading off to the tail pipes.

The 650 should be similar but go to your single tail pipe.

Follow the exhaust pipe out of the back of the rear cylinder until it joins another tube with a clamp over the joint. The gasket is in the joint and can break up and move within the joint.

Does this help ? I'll be back about 4:30 am.

Ratty

06-07-10, 01:22 AM	#5
Ratty Member Join Date: Feb 2004 Location: Stockport Posts: 597	Re: SK9 suddenly got noiser / more vibrations The header pipe is the pipe that comes out of the cylinder head. The front and rear header pipes ( on the thou ) go into a collecter box under the engine before heading off to the tail pipes. The 650 should be similar but go to your single tail pipe. Follow the exhaust pipe out of the back of the rear cylinder until it joins another tube with a clamp over the joint. The gasket is in the joint and can break up and move within the joint. Does this help ? I'll be back about 4:30 am. Ratty __________________ "I can see Paradise by the SV's light" TCX Competizione S boots saved my foot .