SV650.org - SV650 & Gladius 650 Forum - View Single Post

Sid Squid · 29-08-10, 06:39 PM

Only if the distance that the footrest is moved is very slight, if it moves very far the gearchange rod will need to be altered.
Do not be attempted to use a rod the wrong length and turn the gearchange round on the shaft - the gearchange will be horrid. Always keep the angle between them as close to 90º as possible.

29-08-10, 06:39 PM	#2
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: Adjusting Footpeg Assembly Position Only if the distance that the footrest is moved is very slight, if it moves very far the gearchange rod will need to be altered. Do not be attempted to use a rod the wrong length and turn the gearchange round on the shaft - the gearchange will be horrid. Always keep the angle between them as close to 90º as possible. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"