[Biker Biggles]

The chokes are a regular issue on the sv.If you follow the cable it goes into a splitter and one goes to each carb.The cable itself and splitter need lubing so it moves freely,and where the cables enter the carbs there is a single screw holding a small plate which holds the cable to the carb.Remove the screw(thats the tricky bit)and gently pull the cable out.It is spring loaded against the plunger.Just make sure that moves freely and is lubed up.You need the right screwdriver to get them out and access to the front one is confined.Practice on the rear one which is easy.