SV650.org - SV650 & Gladius 650 Forum - View Single Post

03-03-11, 07:31 PM

You shouldn't need to remove anything. If you look in past the forks you should see the plugs on the bulb pins. Carefully pull them off. Theres a big round diaphragm about the diamater of an orange. You should be able to pull that off and be presented with the clip holding the bulb in. Figure that out and the bulb will be released. When fitting the new bulbs DO NOT touch the glass with your fingers.

I imagine that its a very similar setup to the curvy but you haven't got to remove anything.

I'd take some pics for you but I haven't got an SV any more.

If you look at the second picture HERE you can see the rubber diaphragm and pins from the bulbs.

03-03-11, 07:31 PM	#2
monkey Guest Posts: n/a	Re: Changing headlight bulbs K3 SV650S You shouldn't need to remove anything. If you look in past the forks you should see the plugs on the bulb pins. Carefully pull them off. Theres a big round diaphragm about the diamater of an orange. You should be able to pull that off and be presented with the clip holding the bulb in. Figure that out and the bulb will be released. When fitting the new bulbs DO NOT touch the glass with your fingers. I imagine that its a very similar setup to the curvy but you haven't got to remove anything. I'd take some pics for you but I haven't got an SV any more. If you look at the second picture HERE you can see the rubber diaphragm and pins from the bulbs.