Quote:
Originally Posted by daveyrach
Seems to be the connector on from the switch to the main loom, the big yellow one. Fiddled with it and cleaned, first i had everything just no horn, then horn but no indicators, then indicators and horn but no hight beam, luckily it seems to be the part of the block on the switch side.
|
Had same problems with mine yesterday. Looked at wiring diagrams and took switch gear to bits. All wiring is different and not connected in any way. I put it back together and was just putting everything away when I remembered I had the same problem on my old RF900 and what my brother did to make it work.
He pressed the horn button and tapped the back of the horn with a screwdriver handle. Eventually it started working. Told my it was something to do with the diaphragm sticking together and not vibrating to make the noise required.
Did this yesterday and low and behold....it worked!!! I was gutted because it took me ages to get the switch gear back together!!!