SV650.org - SV650 & Gladius 650 Forum - View Single Post

MJC-DEV · 19-04-11, 05:12 PM

My clutch cut out is pretty much on the limit at '3' with my standard pointy bars. But I found the brake lever could touch the bars at anything less than 3 anyway. If you want to use 1 or 2 then you will have to put a spacer of some kind in the lever slot so it moves the switch with less travel. Small fillet of aluminium rod perhaps?

19-04-11, 05:12 PM	#22
MJC-DEV Member Join Date: Mar 2011 Location: Falmouth Posts: 621	Re: Ebay Billet brake/clutch levers My clutch cut out is pretty much on the limit at '3' with my standard pointy bars. But I found the brake lever could touch the bars at anything less than 3 anyway. If you want to use 1 or 2 then you will have to put a spacer of some kind in the lever slot so it moves the switch with less travel. Small fillet of aluminium rod perhaps?