Quote:
Originally Posted by Red Herring
OK, this is getting to be a bit of a mystery. Have you checked your clutch operation. Is it possible that when the bike went down you have bent the clutch lever so that it isn't coming back far enough to disengage properly. Does the gear lever move easily with the engine off?
|
Quote:
Originally Posted by yorkie_chris
When you can't get it into first, (with it running...), try momentarily release the clutch, then attempt to select 1st again.
(sometimes with the 'box stationary, the dog teeth are directly aligned and so can't slide to engage each other, this is normal. Apologies if this is teaching how to suck eggs)
|
The clutch lever on the left handle of my bike is indeed bent. I did however take off the case that is right behind the link rod and above the drop link where the clutch cable appears to go into the engine. Though my clutch lever is bent, when I pull on it it does pull tension on the chord and move. I can try to adjust it so it pushes the clutch push rod more and see if that works. The shift lever however, does not move easily when the bike is off. When I move it up or down to shift, it feels as if it gets stuck right about when it is supposed to shift and just doesn't. This is for shifting up and down and with the clutch in and out.
Also as I said my battery was dead, I went to charge it today and it says that I have to buy a new battery cause this one is way dead. So that will take a little while before I can start it up again and see if that makes a difference.