SV650.org - SV650 & Gladius 650 Forum - View Single Post

14-03-12, 11:30 AM

OK had a quick look around and I don't think this has been raised before.

For a Flywheel Puller use M20 x 1.5 RH threaded approx 80mm long (usually 30mm socket) and a rattle gun (Electric Impact Wrench).

Screw bolt into Flywheel and apply short blasts with the rattle gun, took 3 short blasts on mine.

If you havent got an impact wrench you really need to buy one if pulling bikes apart, mine cost about £20 from lidl.

14-03-12, 11:30 AM	#1
hardhat_harry Guest Posts: n/a	Top Tip: SV650 Fly Wheel Puller. OK had a quick look around and I don't think this has been raised before. For a Flywheel Puller use M20 x 1.5 RH threaded approx 80mm long (usually 30mm socket) and a rattle gun (Electric Impact Wrench). Screw bolt into Flywheel and apply short blasts with the rattle gun, took 3 short blasts on mine. If you havent got an impact wrench you really need to buy one if pulling bikes apart, mine cost about £20 from lidl.