SV650.org - SV650 & Gladius 650 Forum - View Single Post

23-03-12, 08:31 PM

I've edited my post regarding the 'spacer' and its dimensions, its now called an adaptor

, needed on the pointy to reduce the diameter of the top of the damping rod from the 27.0mm down to the emulators 23.9mm. If you don't fit this adaptor to reduce the diameter then the emulator will not be kept central in the damping rod and will be like a pr*ck-in-a-bucket! Probably won't seal too well either as if its over one side then some oil can get past unrestricted and it won't function right. I'll add some pics to show it all.

23-03-12, 08:31 PM	#15
Urbanfireblade Guest Posts: n/a	Re: How to fit Emulators to a pointy I've edited my post regarding the 'spacer' and its dimensions, its now called an adaptor , needed on the pointy to reduce the diameter of the top of the damping rod from the 27.0mm down to the emulators 23.9mm. If you don't fit this adaptor to reduce the diameter then the emulator will not be kept central in the damping rod and will be like a pr*ck-in-a-bucket! Probably won't seal too well either as if its over one side then some oil can get past unrestricted and it won't function right. I'll add some pics to show it all.