View Single Post
Old 29-04-12, 07:52 PM   #10
muzikill
Member
Mega Poster
 
muzikill's Avatar
 
Join Date: Jul 2005
Location: Dunfermline
Posts: 1,712
Default Re: Bleeding rear brakes

Quote:
Originally Posted by Bibio View Post
have you tried the. pressure, open bleed nipple, close bleed nipple, repeat method?

also you can get a small air trap in the MC so sometimes putting a rag to catch the brake fluid and then put a little pressure on the pedal and cracking the MC banjo open then closing it again before you get to the full stroke of the brake pedal gets rid of it.
This week i MUST do this. pm me a day to give you back yer carbtune btw. Im backshift wed so no good on that day.
__________________
Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again!
K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.
muzikill is offline   Reply With Quote