SV650.org - SV650 & Gladius 650 Forum - View Single Post

13-07-12, 03:31 PM

I'm selling these silver riser plates - a cheaper alternative to rearsets or as a lowering kit - moves pegs 1" back and 1" up or down:

http://www.ebay.co.uk/itm/Riser-Plat...#ht_1319wt_808

Which have been fitted to an SV1000SK3 so slightly marked but cosmetic only.

Will fit 1999 - 2011 SV650N/S and 2003 - 2008 SV1000N/S.

PLATES ARE REVERSIBLE (1-INCH BACK & DOWN) ON 1999-2002 SV650's. THE PLATES WILL REQUIRE SOME GRINDING TO MAKE THEM REVERSIBLE ON THE NEWER 2003+ SV650's & 1000's BUT IT IS POSSIBLE - see the thread http://www.sv-portal.com/forums/showthread.php?t=43190 which details the mods; essentially mod the brake lever and stop switch springs, brake reservoir to cylinder pipe and the gear change rose joint needs reversing.

I'm in Gloucester.

13-07-12, 03:31 PM	#1
tim8061 Guest Posts: n/a	Rearset riser/lowering plates £20 I'm selling these silver riser plates - a cheaper alternative to rearsets or as a lowering kit - moves pegs 1" back and 1" up or down: http://www.ebay.co.uk/itm/Riser-Plat...#ht_1319wt_808 Which have been fitted to an SV1000SK3 so slightly marked but cosmetic only. Will fit 1999 - 2011 SV650N/S and 2003 - 2008 SV1000N/S. PLATES ARE REVERSIBLE (1-INCH BACK & DOWN) ON 1999-2002 SV650's. THE PLATES WILL REQUIRE SOME GRINDING TO MAKE THEM REVERSIBLE ON THE NEWER 2003+ SV650's & 1000's BUT IT IS POSSIBLE - see the thread http://www.sv-portal.com/forums/showthread.php?t=43190 which details the mods; essentially mod the brake lever and stop switch springs, brake reservoir to cylinder pipe and the gear change rose joint needs reversing. I'm in Gloucester. Last edited by tim8061; 13-07-12 at 03:43 PM.