View Single Post
Old 15-05-13, 06:46 AM   #12
davpag1
Guest
 
Posts: n/a
Default

Hi Riders

I've finally fitted a set of Denso twin horns. The reason for using these compared to other makes - Bosche, Hella - was the limited room between the radiator, tank and frame made it not practical to have larger ones. The Denso are slightly smaller diameter than the original horn size.

I used Sid Squids diagram as a base to go from. It was very helpful. With a metre of wire, relay and connectors it went fine.

One horn was placed in the original position. The second I attached to the radiator side bolt, (with a bracket) facing the horn inwards. The relay was attached to the frame with a small nylock strap. Keeping everything firm and in place. Finally the fuse connector was attached close to the battery, as advised by Sid Squid.

Once everything was in place and connected I turned the key and pressed the horn. Out came a much louder and stronger sound than the stock horn. Hopefully this will help riding through traffic here in the Philippines.

Thanks to the members who gave me advice. Its appreciated. Check out the sound on this very short YouTube video link below.

Tks....Ride Safe

https://www.youtube.com/watch?v=XZ3k...e_gdata_player

Last edited by davpag1; 15-05-13 at 07:52 AM.
  Reply With Quote