SV650.org - SV650 & Gladius 650 Forum - View Single Post - Perfect suspension fork bush and seal fitting tool.

31-05-13, 03:01 PM

I tapped the top bushes into place with a hammer and drift plus a little patience.

I first fitted the washer over the bush, slid a couple of toilet roll tubes over the fork tube, put insulation tape over the shaft of the drift and tapped away (12 o'clock, 18:30, 08:45, 15:15 etc. etc.)

31-05-13, 03:01 PM	#7
trail guru Guest Posts: n/a	Re: Perfect suspension fork bush and seal fitting tool. I tapped the top bushes into place with a hammer and drift plus a little patience. I first fitted the washer over the bush, slid a couple of toilet roll tubes over the fork tube, put insulation tape over the shaft of the drift and tapped away (12 o'clock, 18:30, 08:45, 15:15 etc. etc.)