SV650.org - SV650 & Gladius 650 Forum - View Single Post

18-10-13, 06:13 PM

Check ignition wires first, if it's not blowing fuses then I usually look for a dodgy earth first, if it is then look for a live. look to see where the loom rubs as you move the bars. inspect all connector blocks for corrosion and nows a good time to fill them with a good water proof grease.. Good luck.

18-10-13, 06:13 PM	#2
rb8989 Guest Posts: n/a	Re: Wiring Short, Best Approach? Check ignition wires first, if it's not blowing fuses then I usually look for a dodgy earth first, if it is then look for a live. look to see where the loom rubs as you move the bars. inspect all connector blocks for corrosion and nows a good time to fill them with a good water proof grease.. Good luck.