basic Gizmo Fitting
everything is pretty much self explanatory apart from the connectors for the Ignition on/off live feed.
2.connects inline with your rear brake light switch.
3.connects to an ignition live feed somewhere on the loom (number plate light for instance), if your using the number plate light then you will need to determine which wire is live and which is return. if you connect to the return and the bulb blows on your number plate light then you will loose power to the Gizmo so you need to use the live feed.
to use (3) connector all you do is lay the selected cable on top of the metal fork then press a little once you have done that you can then fold the plastic housing over and snap shut, you will then have a slot in the front of the connector that you push (1) into.