Quote:
Originally Posted by R1ffR4ff
Took my Starter motor off and cleaned and serviced it.Little bit of Scotchbrite on the ends and some cheap silver aerosol paint(Quid from Poundshop).
Bared/Brightened all contacts/ring connectors and made sure starter to engine contact points were bare and no paint or grease.Dialectic grease over the ring contacts on the Starter after re-fit and also over the oil sender unit.Bolts reset with a little copper grease and a little locktite as they had been fitted using low impact White locktite.Only had blue so just a little dab.
 |
I put a plastic cover over mine. Made it from a black plastic drain pipe.