SV650.org - SV650 & Gladius 650 Forum - View Single Post

22-08-17, 03:43 PM

He has just measured the voltage at the black three pin connector that pushes onto the bulb and there is about 11.8v at both high beam and low beam terminals. This is while it is NOT connected to the bulb. With the connector pushed onto the bulb high beam works and measures 10.1v at that terminal. Low beam does not work and measures 0.04v.

22-08-17, 03:43 PM	#14
suzukijax Guest Posts: n/a	Re: Low beam not working. He has just measured the voltage at the black three pin connector that pushes onto the bulb and there is about 11.8v at both high beam and low beam terminals. This is while it is NOT connected to the bulb. With the connector pushed onto the bulb high beam works and measures 10.1v at that terminal. Low beam does not work and measures 0.04v.