Quote:
Originally Posted by Lordspectre
Many thanks, will pick up a voltage tester in the morning
|
You could probably get a multimeter from Maplin for a tenner, get the cheapest one, it will be fine and last a while, you will use it lots of times.
You could always use a 12v bulb and a couple of bits of wire if you don’t have a meter, you just need to see whether there is a signal or not. Another way would be to find the first connector block after the switch and use a little bit of wire to connect the black wire to the green one, if the problem swaps sides then the switch is at fault.
Sent from my iPad using Tapatalk