SV650.org - SV650 & Gladius 650 Forum - View Single Post

GeorgeRYoung · 15-07-20, 03:35 PM

Press on the brake pedal, loosen the brake line fitting (banjo bolt) at the top of the master cylinder (air and fluid comes out), tighten the banjo bolt then release the pedal. Repeat a few times until the pedal becomes firm. Unfortunately, this is messy, brake fluid dribbles onto the swing arm and the rear wheel, dammit!

15-07-20, 03:35 PM	#10
GeorgeRYoung Member Join Date: Aug 2019 Posts: 48	Re: no pressure In rear brakes Press on the brake pedal, loosen the brake line fitting (banjo bolt) at the top of the master cylinder (air and fluid comes out), tighten the banjo bolt then release the pedal. Repeat a few times until the pedal becomes firm. Unfortunately, this is messy, brake fluid dribbles onto the swing arm and the rear wheel, dammit! __________________ 65 CB160 (67-69), 69 350GTR (69-72), 72 R5, 73 RD350 (73-84), 82 XZ550 Vision (84-03), 01 Concours C10 (03-19), 89 EX250 (11-14), 00 SV650S (14-16), 03 SV650S (19-)