Quote:
Originally Posted by admin
I lied. I've picked up the repaired wheel and had fun refitting it. And guess what, the nut is the Fuji type, I just didn't notice before.
Sent from my moto g(50) using Tapatalk
|
Just as an aside I made this for the next time I need to raise and fit my rear wheel off the ground and align the axle from an idea on the US SV site,
Using one of these,
Pump Wedge eBay
You don't have to use wood. Hard foam blocks were used as well. Base is a bit of old hardboard or chipboard. I've tested it under the fitted rear wheel and it will work great
HTH