Quote:
Originally Posted by R1ffR4ff
Just as an aside I made this for the next time I need to raise and fit my rear wheel off the ground and align the axle from an idea on the US SV site,
Using one of these,
Pump Wedge eBay
You don't have to use wood. Hard foam blocks were used as well. Base is a bit of old hardboard or chipboard. I've tested it under the fitted rear wheel and it will work great 
HTH |
I usually use some spare wood to lift the wheel but this looks like a much better idea. Thanks
Sent from my moto g(50) using Tapatalk