Re: running on one
Progress made! A 5inch set of mole grips undid the two screws opposite each other, the third was removed by tapping the float bowl until the seal gave, then the screwdriver undid it.
You were crack on with the diagnoses R1FF (I hope) the float was stuck in the up position, on touching it, it dropped. Checking the needle its internal spring seemed weak compered to the new one. All changed plus a going over with carb cleaner and a blast out with compressed air. Carbs back together with vacuum hose extended on the front carb ready for balancing if the bike runs ok after carb refitted
Once again thank you R1FF
|