SV650.org - SV650 & Gladius 650 Forum - View Single Post

Fazer Fail · 21-05-25, 09:33 AM

Hi yes 2003 S model was converted to bars and aftermarket top yoke but in this time forks were off to get seals done or so history says.

Yes clip on are below the yoke and seated in the retaining lug, when the oem yoke was refitted the top of the forks are uneven one side 4.5 mm below the surface, other 3.6 mm below the surface.

I assume the flush means the top of the tops flush with the thickness of the top cap showing or bang on flush with the top cap?

The poor old thing had a saggy rear shock and it seems raised front end must have felt very different.

21-05-25, 09:33 AM	#22
Fazer Fail Junior Member Join Date: Mar 2025 Posts: 10	Re: K3 front end Hi yes 2003 S model was converted to bars and aftermarket top yoke but in this time forks were off to get seals done or so history says. Yes clip on are below the yoke and seated in the retaining lug, when the oem yoke was refitted the top of the forks are uneven one side 4.5 mm below the surface, other 3.6 mm below the surface. I assume the flush means the top of the tops flush with the thickness of the top cap showing or bang on flush with the top cap? The poor old thing had a saggy rear shock and it seems raised front end must have felt very different.