SV650.org - SV650 & Gladius 650 Forum - View Single Post

TSM · 27-11-05, 01:33 PM

If you are having problems turning the alarm off, or when you turn it off it just starts again, check the fuse to the alarm. If this is blown it will not work correctly. Also try dissarming the alarm with the ignition turned on.

Dont go removing any switches or wiring as this may make the insurance company a bit iffy in the event of the bike being stolen and as said before the switch only looks for a state change eg on-off or off-on. I have broken a bit off my switch so its never pressed down when the seat is on, apart from that the alarm still works fine.

27-11-05, 01:33 PM	#4
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	If you are having problems turning the alarm off, or when you turn it off it just starts again, check the fuse to the alarm. If this is blown it will not work correctly. Also try dissarming the alarm with the ignition turned on. Dont go removing any switches or wiring as this may make the insurance company a bit iffy in the event of the bike being stolen and as said before the switch only looks for a state change eg on-off or off-on. I have broken a bit off my switch so its never pressed down when the seat is on, apart from that the alarm still works fine. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions