SV650.org - SV650 & Gladius 650 Forum - View Single Post

31-07-18, 07:50 PM

Built from a road bike over last winter. The bike was completely stripped to its component parts and the following work completed. Since the build I have done 3 track days on the bike,
Chassis
• New head bearings
• New 520 chain and sprokets
• Swing arm / suspension linkage bearings replaced or re packed
• New wheel bearings front and rear
• Race products rearsets
• Clip-ons with removable bars, renthal grips
• Alloy front and rear subframes
• Adjustable levers (long)
• Shark fin fitted
• Adjustable lock stops

Suspension
• Forks have been rebuilt with 9.5 ktech springs, emulators, preload adjusters (minitwin compliant) and 20w oil plus new seals and shims.
• Nitron R2 rear shock with adjustable ride height.

Brakes
• Fully rebuilt calipers with new seals, pistons and SBS race pads
• Rebuilt master cylinders
• Braided lines
• New genuine Suzuki front discs

Electrics
• Race loom
• Twin spark coils
• Relocated rectifier, battery and ecu.
• Keyless ignition
• ZXR tacho
• ZXR temp gauge
• Rain light

Bodywork
• BBS M1 fairing & Screen
• CBR1000 tail unit
• Race fuel cap

Engine
• Replacement 2016 engine with less than 10k on it
• Carbs fully rebuilt with new diaphragms and dynojet kit
• BMC air filter
• Beawolf end can
• Exhaust headers wrapped near fairing
• New genuine Suzuki clutch plate kit (steels and friction)
• QA throttle (1/5th turn)
• Rebuilt fuel tap
• Lockwired

Spares
• Wets on wheels
o Nearly new genuine Suzuki discs
o New bearings
o 2017 Pirelli wets with less than 10 laps on (in the pishing rain)
• engine parts
o Heads
o Gearbox
o Radiator
o Odds and sods
• stand
• Rearsets
• Carb spares including the Dynojet kit
• Whatever else is in the crate!!

Looking for £2500 ono. Based in North Kent.

07717 79i734.

31-07-18, 07:50 PM	#1
Ahthud Guest Posts: n/a	Sv650 minitwin for sale Built from a road bike over last winter. The bike was completely stripped to its component parts and the following work completed. Since the build I have done 3 track days on the bike, Chassis • New head bearings • New 520 chain and sprokets • Swing arm / suspension linkage bearings replaced or re packed • New wheel bearings front and rear • Race products rearsets • Clip-ons with removable bars, renthal grips • Alloy front and rear subframes • Adjustable levers (long) • Shark fin fitted • Adjustable lock stops Suspension • Forks have been rebuilt with 9.5 ktech springs, emulators, preload adjusters (minitwin compliant) and 20w oil plus new seals and shims. • Nitron R2 rear shock with adjustable ride height. Brakes • Fully rebuilt calipers with new seals, pistons and SBS race pads • Rebuilt master cylinders • Braided lines • New genuine Suzuki front discs Electrics • Race loom • Twin spark coils • Relocated rectifier, battery and ecu. • Keyless ignition • ZXR tacho • ZXR temp gauge • Rain light Bodywork • BBS M1 fairing & Screen • CBR1000 tail unit • Race fuel cap Engine • Replacement 2016 engine with less than 10k on it • Carbs fully rebuilt with new diaphragms and dynojet kit • BMC air filter • Beawolf end can • Exhaust headers wrapped near fairing • New genuine Suzuki clutch plate kit (steels and friction) • QA throttle (1/5th turn) • Rebuilt fuel tap • Lockwired Spares • Wets on wheels o Nearly new genuine Suzuki discs o New bearings o 2017 Pirelli wets with less than 10 laps on (in the pishing rain) • engine parts o Heads o Gearbox o Radiator o Odds and sods • stand • Rearsets • Carb spares including the Dynojet kit • Whatever else is in the crate!! Looking for £2500 ono. Based in North Kent. 07717 79i734.